IKO TLA 2020 Z,TLAM 2020,TLA 2030 Z,TLAM 2030 SHELL TYPE NEEDLE ROLLER BEARINGS
IKO TLA 2020 Z,TLAM 2020,TLA 2030 Z,TLAM 2030 Description
| Shaft dia.
mm | Identification number | ||||||||||||
| Standard | Mass (Ref. ) g | Closed | end | Mass (Ref. ) g | Standard | Mass (Ref. ) g | Closed end | Mass (Ref. ) g | Grease retained | Mass (Ref. ) g | |||
| ─ ─ ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | TLA 2012 Z TLA 2016 Z TLA 2020 Z TLA 2030 Z | 13.2 17.8 22 33 | TLAM 2012 TLAM 2016 TLAM 2020 TLAM 2030 | 15.2 19.9 24 35 | ─ ─ ─ ─ | ─ ─ ─ ─ | ||||
| 20 | TA TA TA TA | 2015 Z 2020 Z 2025 Z 2030 Z ─ ─ | 20 26.5 33 39.5 ─ ─ | TAM 2015 TAM 2020 TAM 2025 TAM 2030 ─ ─ | 22.5 29 35.5 42 ─ ─ | ─ ─ ─ ─ ─ ─ | ─ ─ ─ ─ ─ ─ | ─ ─ ─ ─ ─ ─ | ─ ─ ─ ─ ─ ─ |
YT YT | ─ ─ ─ ─ 2015 2025 | ─ ─ ─ ─ 23.5 41 | |
| TA 202820 Z ─ | 30 ─ | TAM 202820 ─ | 32.5 ─ | ─ ─ | ─ ─ | ─ ─ | ─ ─ | ─ YT 202820 | ─ 37.5 | ||||
| 21 | TA TA | 2116 Z 2120 Z ─ ─ | 25 31.5 ─ ─ | TAM 2116 TAM 2120 ─ ─ | 28 34.5 ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ | ─ ─ ─ ─ |
YT YT | ─ ─ 2116 2120 | ─ ─ 31 39 | |
| Boundary dimensions mm | Standard mounting dimensions mm | Basic dynamic load rating C N | Basic static load rating C0 N | Allowable rotational speed(1)
min-1 | Assembled inner ring | |||||||||
| Shaft dia. h6 | Housing bore dia. | |||||||||||||
| Fw | D | C | t2 Max. | |||||||||||
| J7 | N7 | |||||||||||||
| Max. | Min. | Max. | Min. | Max. | Min. | |||||||||
| 20 20 20 20 | 26 26 26 26 | 12 16 20 30 | 1.3 1.3 1.3 1.3 | 20.000 | 19.987 | ─ | ─ | 25.993 | 25.972 | 8 740 11 100 14 500 22 300 | 12 900 17 500 24 700 42 900 | 20 000 20 000 20 000 20 000 | ─ IRT 1716 IRT 1720 IRT 1730 | |
| 20 20 20 20 20 20 | 27 27 27 27 27 27 | 15 20 25 30 15 25 | 1.3 1.3 1.3 1.3 ─ ─ |
20.000 |
19.987 |
27.012 |
26.991 |
─ |
─ | 10 400 15 000 19 200 23 100 18 400 30 000 | 14 600 23 400 32 200 41 000 30 900 58 300 | 20 000 20 000 20 000 20 000 7 500 7 500 | IRT 1515-2 IRT 1520-2 IRT 1525-2 IRT 1530-2 IRT 1515-2 IRT 1525-2 | |
| 20 20 | 28 28 | 20 20 | 1.3 ─ | 20.000 | 19.987 | 28.012 | 27.991 | ─ | ─ | 16 900 26 800 | 24 300 44 600 | 20 000 7 500 | IRT 1520-2 IRT 1520-2 | |
| 21 21 21 21 | 29 29 29 29 | 16 20 16 20 | 1.3 1.3 ─ ─ |
21.000 |
20.987 |
29.012 |
28.991 | ─ | ─ | 13 300 17 600 22 100 27 500 | 18 100 25 900 35 200 46 800 | 19 000 19 000 7 000 7 000 | IRT 1716-1 IRT 1720-1 IRT 1716-1 IRT 1720-1 | |
IKO TLA 2020 Z,TLAM 2020,TLA 2030 Z,TLAM 2030 Nots
Note(1) Allowable rotational speed applies to oil lubrication. For grease lubrication, a maximum of 60% of this value is allowable.
Remark Shell Type Grease Retained Full Complement Needle Roller Bearings are provided with prepacked grease. Standard type and closed
end type bearings are not provided with prepacked grease, so perform proper lubrication when using these types of bearings.
